PDF to JPG Resolution: Picking the Right DPI for Each Use
For most PDF to JPG conversions, render at 150 DPI for screens and 300 DPI for printing or OCR. To get the image's pixel size, multiply the page size in inches by the DPI. A US Letter page (8.5 × 11 inches) at 150 DPI comes out at 1275 × 1650 pixels. An A4 page at 150 DPI comes out at 1240 × 1754 pixels.
The resolution setting matters because a PDF page has no fixed pixel size. Text and shapes in most PDFs are stored as vectors, which are mathematical outlines. The converter has to draw (rasterize) those outlines onto a pixel grid, and the DPI you pick sets how fine that grid is. If the grid is too coarse, small text turns to mush. If it's too fine, the files get huge with no visible benefit.
This guide covers the unit PDFs use, the formula for output size, a table of common page sizes, recommendations for each use, and why PNG sometimes beats JPG for pages that are mostly text.
How PDF page size turns into pixels
Points: the unit inside every PDF
PDFs measure pages in points, and 1 inch equals 72 points. A US Letter page is 612 × 792 points, because 8.5 × 72 = 612 and 11 × 72 = 792. An A4 page is 210 × 297 mm. Since 1 inch is 25.4 mm, that works out to about 595.28 × 841.89 points, usually rounded to 595 × 842.
Points measure physical size, not pixels. The page has no pixel dimensions until something renders it.
The formula
Pixels = (points ÷ 72) × DPI, or equivalently pixels = inches × DPI.
Here, DPI (dots per inch) means how many pixels the converter draws for each inch of the page. Strictly speaking, pixels per inch (PPI) is the more accurate term for images, but conversion tools almost always label this setting DPI. If the difference matters for your work, see DPI vs PPI explained.
Worked example: US Letter and A4 at 150 DPI
- Convert Letter width to inches: 612 ÷ 72 = 8.5 inches.
- Multiply by DPI: 8.5 × 150 = 1275 pixels wide.
- Convert the height: 792 ÷ 72 = 11 inches, and 11 × 150 = 1650 pixels tall.
- Do A4 from millimeters: 210 ÷ 25.4 = 8.2677 inches, and 8.2677 × 150 = 1240.2, which rounds to 1240 pixels.
- A4 height: 297 ÷ 25.4 = 11.6929 inches, and 11.6929 × 150 = 1753.9, which rounds to 1754 pixels.
A4 rarely comes out to whole numbers, so one tool may give 1753 where another gives 1754. A one-pixel difference like that comes from rounding and isn't an error.
PDF to JPG resolution table for common page sizes
All values below are portrait orientation. For landscape pages, swap width and height. A4 values are rounded to the nearest pixel.
| Page size (points) | 72 DPI | 96 DPI | 150 DPI | 200 DPI | 300 DPI |
|---|---|---|---|---|---|
| US Letter, 8.5 × 11 in (612 × 792) | 612 × 792 | 816 × 1056 | 1275 × 1650 | 1700 × 2200 | 2550 × 3300 |
| A4, 210 × 297 mm (595 × 842) | 595 × 842 | 794 × 1123 | 1240 × 1754 | 1654 × 2339 | 2480 × 3508 |
| US Legal, 8.5 × 14 in (612 × 1008) | 612 × 1008 | 816 × 1344 | 1275 × 2100 | 1700 × 2800 | 2550 × 4200 |
Two patterns are worth remembering. At 72 DPI, the pixel size equals the point size, because one point maps to one pixel. And every time you double the DPI, both dimensions double. For Letter, 150 DPI gives 1275 × 1650, and 300 DPI gives 2550 × 3300.
Some converters show a scale or zoom setting (1×, 2×, 3×) instead of DPI. To find out what 1× means in your tool, convert one Letter page and check the width. If it's 612 pixels, then 1× equals 72 DPI, 2× equals 144 DPI, and so on. Tools differ on this, so a quick test is better than assuming.
Which DPI to choose for each use
Choose the DPI for where the image will end up, not for the highest quality the tool offers.
| Use | Suggested DPI | Format | Why |
|---|---|---|---|
| Thumbnail or preview in a list | 72–96 | JPG | Only needs to be recognizable, not readable |
| Viewing on screen, slides, chat, web pages | 150 | JPG or PNG | Body text is readable on most screens at this size |
| Pages with small print (footnotes, tables, forms) | 200 | PNG | Gives fine strokes enough pixels to stay legible |
| Printing at the original page size | 300 | JPG (high quality) or PNG | 300 pixels per printed inch is the usual target for sharp print |
| OCR (text recognition) | 300 | PNG or high-quality JPG | 300 DPI is the common starting point for OCR software |
| Technical drawings, maps, tiny type | 300–600 | PNG | Thin lines vanish or break up at lower resolutions |
Working backward from a target pixel width
Sometimes a website, form, or slide template calls for a specific width. In that case, solve for DPI: DPI = target width ÷ page width in inches.
For example, say you need a Letter page 1080 pixels wide. Then 1080 ÷ 8.5 = 127.06 DPI. The height follows the same ratio: 11 × 127.06 = 1397.6, so about 1398 pixels. If your converter only offers fixed steps like 150 DPI, render one step higher and scale down afterward. The free image resizer can resize by exact pixel width. Keep the aspect ratio unchanged (1080 × 1398 for this example) so the page doesn't end up stretched or squashed.
High-density screens need more pixels
Phones and many laptops have high-density displays that use two or three physical pixels for every pixel a web page lays out. If an image appears 800 pixels wide on such a screen but contains only 800 pixels, it gets stretched and looks soft. MDN's page on devicePixelRatio explains how browsers report this ratio. In practice, rendering at 1.5 to 2 times the display width keeps text crisp. That's another reason 150–200 DPI is safer than 96 DPI for anything people will read on screen.
JPG or PNG for text-heavy pages
JPG uses lossy compression, which means it throws away detail to save space. It does this by breaking the image into small 8 × 8 pixel blocks and simplifying each one. That works well for photos, where colors change gradually. Text is the opposite: sharp black edges on flat white. Around those edges, JPG compression often leaves faint gray speckles called ringing artifacts. The lower the quality setting, the worse they get.
Many JPG encoders also store color at a lower resolution than brightness (a technique called chroma subsampling). Black text on white is mostly unaffected. Colored text, such as red headings or blue links, can pick up fuzzy fringes.
PNG is lossless, so every pixel is saved exactly as rendered. On pages that are mostly text and flat color, PNG compresses well because those areas repeat so much. At the same resolution, a PNG of a plain text page is often similar in size to a high-quality JPG, and sometimes smaller. On a page covered in photos, the result flips: PNG files get much larger than JPG.
A practical rule:
- Mostly text, line art, charts, forms, or screenshots: use PNG.
- Mostly photos, or a magazine-style layout: use JPG at a quality around 80–90.
- Must be JPG (an upload form that only takes JPG, for example): keep quality high and raise the DPI a step, so artifacts are smaller relative to the letters.
The JPG vs PNG vs WebP comparison goes into more detail about each format. The free PDF to JPG converter can output either JPG or PNG and bundles multi-page results into a ZIP. That makes it easy to try both formats on one page and compare.
File size: what doubling the DPI really costs
DPI scales both width and height, so the pixel count grows with the square of the DPI. Doubling from 150 to 300 DPI gives four times as many pixels, not twice as many.
Here is the arithmetic for one Letter page, using uncompressed RGB data at 3 bytes per pixel. That's roughly what an app holds in memory while it works with the image.
| DPI | Pixel dimensions | Total pixels | Uncompressed size |
|---|---|---|---|
| 150 | 1275 × 1650 | 2,103,750 (2.1 MP) | about 6.3 MB |
| 300 | 2550 × 3300 | 8,415,000 (8.4 MP) | about 25.2 MB |
| 600 | 5100 × 6600 | 33,660,000 (33.7 MP) | about 101 MB |
For example, 2550 × 3300 = 8,415,000 pixels, and 8,415,000 × 3 = 25,245,000 bytes, or about 25.2 MB. The saved JPG or PNG is much smaller than that. The exact size depends on the page content and the quality setting, so no fixed number applies. Still, the four-times rule holds roughly. A 300 DPI export of a 40-page document can easily be several times the size of the original PDF.
Ways to keep file sizes under control:
- Convert only the pages you need. Pull them out first. How to extract pages from a PDF walks through it.
- Use grayscale if the page has no meaningful color and your tool supports it. That removes two of the three color channels.
- Lower JPG quality before lowering DPI for photo-heavy pages. Quality 80 often looks almost the same as 95 at a fraction of the size.
- Avoid 600 DPI unless you have a specific reason, such as fine engineering drawings or a print shop that asked for it.
Why vector text turns blurry after conversion
In the PDF, text is drawn from outlines, so it stays sharp at any zoom level. After conversion, it's a fixed grid of pixels. Blurriness usually comes from one of these causes.
The DPI was too low for the text size
A 10-point font is 10 pixels tall per em at 72 DPI. (The em is the font's full design height. Lowercase letters fill only part of it, often around half, depending on the typeface.) That leaves just a few pixels for each lowercase letter, which isn't enough for clean shapes. At 150 DPI, the same font gets 10 ÷ 72 × 150 = 20.8 pixels per em. At 300 DPI it gets 41.7. Small print like 7- or 8-point footnotes needs the higher settings most.
The image was enlarged after conversion
Zooming past 100% or resizing upward makes the software invent pixels by blending neighboring ones, which softens edges. It can't recover the vector detail. Render at the size you need in the first place instead of upscaling later.
JPG compression smeared the edges
Low quality settings add ringing and blockiness around letters. Re-saving a JPG several times adds more each round. If text matters, switch to PNG or raise the quality setting.
The PDF was a scan to begin with
A scanned PDF holds a picture of the page, not vector text. Rendering it at a higher DPI than the original scan only adds blended pixels, not detail. To check, zoom in far on the PDF. If the letters get jagged or fuzzy, the text is an image. You can't do better than the original scan resolution, so a sensible choice is to match it or render slightly below it.
Quick reference before you convert
- Formula: pixels = (points ÷ 72) × DPI. Letter is 612 × 792 points, and A4 is about 595 × 842.
- Letter at 150 / 300 DPI: 1275 × 1650 / 2550 × 3300 pixels.
- A4 at 150 / 300 DPI: 1240 × 1754 / 2480 × 3508 pixels.
- Screen and sharing: 150 DPI. Small print: 200 DPI. Print and OCR: 300 DPI.
- Text, forms, charts: PNG. Photos: JPG at quality 80–90.
- Need an exact width? DPI = target width ÷ page width in inches. When you resize afterward, keep the aspect ratio.
- File size: doubling the DPI makes about four times as many pixels.
- Scanned PDF: don't render above the original scan resolution.
- Unsure what your tool's scale means? Convert one Letter page and check whether it's 612 pixels wide at 1×.
Frequently Asked Questions
Does the DPI value stored inside a JPG file change its quality?
No. The DPI tag in a JPG is metadata that tells printing and layout apps how large to print the image by default. The pixel dimensions set the actual detail, so a 2550 × 3300 image holds the same information whether it's tagged 72 or 300 DPI.
Why doesn't my converted image match the sizes in the table?
The PDF may use a custom page size, the page may be rotated, or the converter may render a cropped area of the page instead of the full sheet. Some tools also round differently or use a zoom scale that doesn't equal 72 DPI at 1×. Check the page size in your PDF viewer's document properties and apply the formula pixels = (points ÷ 72) × DPI.
If I turn the JPG back into a PDF, will the text be sharp and searchable again?
No. The new PDF just wraps the image, so the text stays as pixels at whatever resolution you rendered. It won't be selectable or searchable unless you run OCR on it. If you still have the original PDF, keep it and share that whenever possible.
What resolution should I use to post a PDF page on social media?
Work backward from the width the platform displays. That width varies by service and changes over time, so check the platform's own help pages. For example, to make a Letter page 1080 pixels wide, render at about 127 DPI, or render at 150 DPI and resize the image down to 1080 pixels.