Everyday Math

How to Find the Original Price After a Discount

Read in other languages: 日本語 · 繁體中文

To find the original price after a discount, divide the sale price by (1 − the discount rate). A $48 item marked 20% off started at $48 ÷ 0.80 = $60. Check: $60 × 0.80 = $48.

Most people try a different shortcut: they add the percentage back on and get $48 × 1.20 = $57.60. That number is wrong, and the gap grows quickly as the discount gets bigger. This guide explains why the division works and why adding the percentage back fails. It also covers stacked discounts and price tags that were rounded before you saw them.

The same method works for anything that was reduced by a percentage, including clearance tags, coupon totals, and "you paid" lines on receipts. If you know what you paid and the percent off, you can recover the starting price.

The formula to find the original price after a discount

A percentage discount multiplies the original price by whatever share is left after the discount. At 20% off you pay 80% of the price, so:

sale price = original price × (1 − discount rate)

To go backward, divide both sides by (1 − discount rate):

original price = sale price ÷ (1 − discount rate)

Write the discount rate as a decimal, so 20% becomes 0.20, 35% becomes 0.35, and so on.

Worked example: $48 after 20% off

  1. Convert the discount to a decimal: 20% = 0.20.
  2. Subtract it from 1 to get the share you actually paid: 1 − 0.20 = 0.80.
  3. Divide the sale price by that share: $48 ÷ 0.80 = $60.
  4. Check by applying the discount forward: $60 × 0.80 = $48. It matches.

Step 4 takes a few seconds and catches most arithmetic slips. If the forward check doesn't land on the sale price, something went wrong in steps 1 to 3.

Why dividing works

The $48 you paid is not "the original price minus something." It is 80% of the original price. If $48 is 80% of a number, then 1% of that number is $48 ÷ 80 = $0.60, and 100% is $0.60 × 100 = $60. Dividing by 0.80 does both steps in one go.

Why adding the percentage back gives the wrong answer

The tempting shortcut is to treat a 20% discount as something you can cancel with a 20% increase: $48 × 1.20 = $57.60. Run the forward check and it fails: $57.60 × 0.80 = $46.08, not $48.

The problem is that the two percentages apply to different amounts. The 20% discount was 20% of the original price, $60, which is $12. The shortcut adds 20% of the sale price, $48, which is only $9.60. Since the sale price is always smaller than the original, adding a percentage of it always comes up short.

How big the error gets

The size of the error is predictable. A discount of rate r followed by an increase of the same rate leaves you at (1 − r) × (1 + r) = 1 − r² of the original price. So the shortcut understates the original by r²:

  • 20% off: 0.20² = 0.04, so the shortcut is 4% low. Check: $60 × 0.04 = $2.40, and $60 − $57.60 = $2.40.
  • 50% off: 0.50² = 0.25, so the shortcut is 25% low. A $50 sale price at half off came from $100, but the shortcut gives $50 × 1.5 = $75.

For small discounts like 5% or 10%, the shortcut is close enough for a rough guess (0.25% and 1% low). For anything from about 20% up, it misleads. The same "percent of what?" trap shows up in many places, and the guide on how to calculate percentages walks through the related formulas.

Quick reference: what to divide or multiply by

Dividing by a decimal is awkward to do in your head, so it helps to know the equivalent multiplier, which is 1 ÷ (1 − rate). The last column shows how far off the add-it-back shortcut would be.

Discount Divide sale price by Or multiply sale price by Add-back shortcut is low by
10% 0.90 1.1111 1%
15% 0.85 1.1765 2.25%
20% 0.80 1.25 4%
25% 0.75 1.3333 6.25%
30% 0.70 1.4286 9%
40% 0.60 1.6667 16%
50% 0.50 2 25%
60% 0.40 2.5 36%
70% 0.30 3.3333 49%
75% 0.25 4 56.25%

A few of these give easy mental-math rules:

  • 20% off: add a quarter of the sale price. $48 + $12 = $60.
  • 25% off: add a third. $45 + $15 = $60.
  • 40% off: add two-thirds. $36 + $24 = $60.
  • 50% off: double it. $30 × 2 = $60.
  • 75% off: multiply by 4. $15 × 4 = $60.

How to find the original price after stacked discounts

Stacked discounts are percentages applied one after another, such as "30% off, plus an extra 10% at checkout." The second discount applies to the already-reduced price, so the multipliers multiply.

Worked example: 30% off, then 10% off, ending at $63

  1. Find the share paid at each step: 1 − 0.30 = 0.70 and 1 − 0.10 = 0.90.
  2. Multiply them to get the combined share: 0.70 × 0.90 = 0.63.
  3. Divide the final price by the combined share: $63 ÷ 0.63 = $100.
  4. Check forward: $100 × 0.70 = $70, then $70 × 0.90 = $63.

The common mistake is to add the discounts and divide by 1 − 0.40 = 0.60. That gives $63 ÷ 0.60 = $105, which is $5 too high. A 30% discount followed by 10% is a 37% total discount, not 40%. The article on why 20% + 10% off isn't 30% covers this in more depth.

The order of two percentage discounts doesn't matter, because 0.70 × 0.90 and 0.90 × 0.70 are both 0.63. The same approach extends to any number of discounts. For 20%, then 10%, then 5% off, the combined share is 0.80 × 0.90 × 0.95 = 0.684, so a final price of $68.40 came from $68.40 ÷ 0.684 = $100.

Mixing a percentage with a dollar-off coupon

When one discount is a fixed amount, order does matter, and you undo the steps in reverse.

  • 20% off, then a $10 coupon, final $38: add the coupon back first ($38 + $10 = $48), then divide ($48 ÷ 0.80 = $60).
  • $10 coupon, then 20% off, final $40: divide first ($40 ÷ 0.80 = $50), then add the coupon back ($50 + $10 = $60).

If you don't know which was applied first, check the receipt. The two orders give different results from the same starting price.

When the price tag was rounded

Real prices are rounded to the cent, and sometimes the advertised percentage is rounded too. Either one can leave the price you work back to slightly off from what was on the original tag.

Sale price rounded to the cent

Say a tag reads $25.99 after 35% off. The formula gives $25.99 ÷ 0.65 = $39.9846..., which rounds to $39.98. But the original might have been $39.99:

  • $39.99 × 0.65 = $25.9935, which rounds to $25.99.
  • $39.98 × 0.65 = $25.987, which also rounds to $25.99.
  • $39.97 × 0.65 = $25.9805, which rounds to $25.98, so it's ruled out.

Two original prices produce the same sale tag. That happens because a 35% discount shrinks every one-cent step in the original to 0.65 cents in the sale price, so neighboring originals can land on the same rounded cent. When your answer lands within a cent or two of a typical retail price like $39.99, that price is the most likely one, since retailers often use .99 endings. Stores can also round differently (some always round down), so a one-cent mismatch doesn't mean your math is wrong.

Discount percentage rounded

A rounded percentage causes much bigger errors than a rounded cent. A sign might say "33% off" when the real discount is one-third. If you paid $20:

  • Using 33%: $20 ÷ 0.67 = $29.85.
  • Using one-third: $20 ÷ (2/3) = $20 × 1.5 = $30.00.

The 15-cent difference comes entirely from the rounded label. If the result looks a little off from a round number, try nearby exact fractions such as 1/3 or 2/3 before trusting it.

"Up to" and "about" discounts

A banner saying "up to 50% off" tells you the largest discount in the sale, not the discount on your item. Use the percentage shown on the item's own tag or receipt line. If you only have the banner figure, the formula gives you the highest price the item could have started at. A smaller discount means a lower starting price.

How to check your answer

Always run the calculation forward once. Take the original price you found, apply each discount in order, and confirm you land on the sale price within a cent.

You can do the forward check with the free discount calculator. Enter the original price you worked out and the percent off, or several percentages for a stacked deal, and compare its final price to your receipt. The percentage calculator works too: decrease your answer by the discount percentage and see whether it returns the sale price.

If the check is off by one or two cents, that's rounding, as described above. If it's off by dollars, look for one of these causes:

  • You divided by the discount rate (0.20) instead of the share paid (0.80).
  • You added stacked percentages instead of multiplying the shares.
  • A fixed-dollar coupon was mixed in and undone in the wrong order.

The forward check can't catch a wrong starting number. If you reverse a total that already includes sales tax, the check lands right back on that same total, so it looks correct. If your result looks too high, make sure the amount you started from didn't include sales tax, and compare against the pre-tax subtotal on your receipt.

Quick checklist for reversing a discount

  • Write the discount as a decimal and subtract it from 1. That gives the share you paid.
  • Divide the sale price by that share. Don't multiply by 1 plus the discount.
  • For stacked percentages, multiply the shares together first (0.70 × 0.90 = 0.63), then divide once.
  • For dollar-off coupons, undo the steps in reverse order: add back what was subtracted last.
  • Start from the pre-tax amount, or take out sales tax before reversing the discount.
  • Expect a cent or two of rounding error, and consider exact fractions when a percentage like 33% looks rounded.
  • Confirm by applying the discount forward to your answer.

Frequently Asked Questions

How do I find the discount percentage if I know both the original and sale price?

Divide the sale price by the original price and subtract the result from 1. For a $60 item selling at $48, that's 1 − (48 ÷ 60) = 1 − 0.80 = 0.20, or 20% off. Multiply by 100 to get the percentage.

What formula do I use in Excel or Google Sheets to get the original price?

If the sale price is in A2 and the discount is in B2 as a percentage (for example 20%), use =A2/(1-B2). If B2 holds a whole number like 20 instead, use =A2/(1-B2/100). Both return 60 for a $48 sale price at 20% off.

How do I find the original price if the discount was a fixed dollar amount?

Add the dollar amount back to what you paid. A $15-off coupon that brought an item to $35 means the original was $35 + $15 = $50. Division is only needed when the discount was a percentage.

Does sales tax change how I find the original price?

If your total includes tax added at checkout, divide out the tax first, then reverse the discount. With 6.5% tax on a $48 sale price, you'd pay $51.12, so $51.12 ÷ 1.065 = $48 and $48 ÷ 0.80 = $60. Tax rates and whether shelf prices include tax depend on where you shop, so check your receipt.

Can I use the same method to undo a price increase or markup?

Yes, but you divide by (1 + rate) instead of (1 − rate). A price of $75 after a 25% markup came from $75 ÷ 1.25 = $60. Subtracting 25% of $75 would give $56.25, which is wrong for the same reason adding a discount back is wrong.