Everyday Math

How Many mL in a Cup? US, UK, and Metric Cups Compared

Read in other languages: 한국어 · 日本語

How many mL in a cup depends on which cup your recipe means. A US customary cup is about 236.6 mL, a US nutrition-label cup is 240 mL, a metric cup is 250 mL, and an old imperial cup is about 284 mL.

For most American recipes, use 237 mL. For Australian recipes and any other recipe written with metric cups, use 250 mL.

The difference between these cups is small enough to ignore in some dishes and large enough to matter in others. The bigger traps are often the Australian tablespoon, the two sizes of fluid ounce, and the assumption that a cup of any ingredient weighs the same.

How many mL are in a cup? The four standards compared

Cup Volume How it is defined Where you will see it
US customary 236.59 mL 8 US fluid ounces, or half a US pint American recipes and measuring cups
US nutrition-label 240 mL Rounded value in FDA labeling rules Serving sizes on US food labels
Metric 250 mL A round metric quantity Australia, New Zealand, Canada, and many UK recipes that use cups
Imperial 284.13 mL 10 imperial fluid ounces, or half an imperial pint Older British and Commonwealth recipes

These numbers differ because each comes from a different system. The US gallon is defined as exactly 231 cubic inches, or 3,785.41 mL. Dividing by 16 gives the US cup: 3,785.41 ÷ 16 = 236.59 mL.

The imperial gallon is a separate unit, defined as 4,546.09 mL. Half an imperial pint is 1/16 of that: 4,546.09 ÷ 16 = 284.13 mL.

The metric cup and the nutrition-label cup are rounder values chosen for convenience. Compared with a US customary cup, the differences work out like this:

  • Nutrition-label cup: 240 ÷ 236.59 = 1.014, or about 1.4% larger
  • Metric cup: 250 ÷ 236.59 = 1.057, or about 5.7% larger
  • Imperial cup: 284.13 ÷ 236.59 = 1.201, or about 20.1% larger

The imperial cup was more of a kitchen convention than a single enforced standard. Some older British and Canadian sources use a cup of 8 imperial fluid ounces instead, which is about 227 mL. When a recipe is old, treat its cup size as uncertain unless it says otherwise.

Quick table: 1/4, 1/3, 1/2, and 3/4 cup in mL

These values are rounded to the nearest mL, which is finer than most kitchen tools can measure anyway.

Amount US customary US label Metric Imperial
1/4 cup 59 mL 60 mL 63 mL 71 mL
1/3 cup 79 mL 80 mL 83 mL 95 mL
1/2 cup 118 mL 120 mL 125 mL 142 mL
3/4 cup 177 mL 180 mL 188 mL 213 mL
1 cup 237 mL 240 mL 250 mL 284 mL

To get any other amount, multiply the cup size by the fraction. For example, 2 1/2 metric cups is 2.5 × 250 = 625 mL, and 2 1/2 US cups is 2.5 × 236.59 = 591 mL.

When the difference matters

The gap between a US and a metric cup is often less serious than it looks. If you measure the flour, sugar, and milk with the same set of cups, all three grow or shrink together, so their ratios stay the same.

Problems appear when cup-measured ingredients are combined with fixed amounts, such as eggs, a stick of butter, or a packet of yeast. A batter made with larger cups then has proportionally less egg or butter. Baking is usually more sensitive to this shift than soups or stews.

Which cup does your recipe use?

Most recipes do not name their cup. These checks, in order, usually settle the question:

  1. Look for a metric equivalent. "1 cup (250 mL)" or "1 cup (240 mL)" tells you directly.
  2. Check the author's location and conversion notes. Many food sites and cookbooks explain their measures on a separate page or in the front matter.
  3. Read the other units. Sticks of butter and oven temperatures in Fahrenheit point to a US recipe. Celsius points elsewhere, and if you need to convert it, here is the formula and a chart for Celsius to Fahrenheit.
  4. Consider the age of the source. A pre-metric British or Commonwealth cookbook may use an imperial cup or another traditional size.
  5. Make a best guess from the source. Without other clues, use 237 mL for American recipes and 250 mL for Australian, New Zealand, and Canadian ones. British recipes vary more, so look for a note from the author.

Most British recipes favor grams and milliliters over cups. If a UK recipe gives cups, it may use 250 mL or may be adapted from a US source.

Tablespoons and teaspoons in mL, including the 20 mL trap

A teaspoon is close to 5 mL almost everywhere in modern recipes. The tablespoon is where recipes disagree, because Australia uses 20 mL while most other countries use about 15 mL.

System Teaspoon Tablespoon Teaspoons per tablespoon Tablespoons per cup
US customary 4.93 mL 14.79 mL 3 16
US nutrition-label 5 mL 15 mL 3 16
Metric: UK, Canada, New Zealand 5 mL 15 mL 3 About 16.7
Australia 5 mL 20 mL 4 12.5

The tablespoons-per-cup figures use each system's own cup. For example, 250 ÷ 20 = 12.5 Australian tablespoons in a metric cup.

Using a 15 mL spoon for an Australian tablespoon leaves you 5 mL short each time, which is 25% less than the recipe intends (5 ÷ 20 = 0.25). That hardly matters for a spoonful of stock, but it can affect strong ingredients such as baking powder, salt, chili paste, or fish sauce.

The easy fix uses a tool you already own: one Australian tablespoon equals 4 teaspoons. With a 15 mL tablespoon, use 1 tablespoon plus 1 teaspoon for each Australian tablespoon. For example, 3 Australian tablespoons are 60 mL, while three 15 mL tablespoons give only 45 mL.

US cup fractions in tablespoons

These equivalents are handy if your 1/4-cup measure is in the dishwasher or you only need a small amount:

  • 1/4 cup = 4 tablespoons
  • 1/3 cup = 5 tablespoons + 1 teaspoon
  • 1/2 cup = 8 tablespoons
  • 3/4 cup = 12 tablespoons
  • 1 US fluid ounce = 2 tablespoons

US vs UK fluid ounces: the smaller ounce and the bigger pint

The US and imperial systems use the same names for different quantities. A US fluid ounce is slightly larger than an imperial one, yet a US pint is much smaller than an imperial pint. The reason is that a US pint holds 16 fluid ounces and an imperial pint holds 20.

Unit US Imperial (UK)
Fluid ounce 29.57 mL 28.41 mL
Cup or half pint 236.59 mL (8 fl oz) 284.13 mL (10 fl oz)
Pint 473.18 mL (16 fl oz) 568.26 mL (20 fl oz)
Quart 946.35 mL 1,136.52 mL
Gallon 3,785.41 mL 4,546.09 mL

The gap per fluid ounce is only 29.57 − 28.41 = 1.16 mL, about 3.9% of a US fluid ounce. It adds up with larger amounts. A recipe calling for 20 fl oz means 568 mL in a British book and 591 mL in an American one (20 × 29.57 = 591.4), a difference of about 23 mL.

The pint gap is far larger. A UK recipe that asks for 1 pint of milk needs 568 mL, while a US pint gives you only 473 mL. That leaves you 95 mL short, or about 17% under the amount the recipe expects (95 ÷ 568 = 0.167).

Why a cup of flour and a cup of sugar weigh different amounts

Cups measure volume, which is the space an ingredient fills. Weight depends on density as well: how much mass is packed into that space. So one cup always holds the same volume, but its weight changes with the ingredient.

The table below gives typical reference values, rounded and based on the US cup. Published charts vary, so treat them as starting points. The metric column multiplies each US value by 250 ÷ 236.59, or about 1.057.

Ingredient 1 US cup (237 mL) 1 metric cup (250 mL) US cup in ounces of weight
Water 237 g 250 g 8.3 oz
All-purpose flour 125 g 132 g 4.4 oz
Granulated sugar 200 g 211 g 7.1 oz
Packed brown sugar 220 g 232 g 7.8 oz
Butter 227 g 240 g 8.0 oz
Honey 340 g 359 g 12.0 oz

Using these values, a cup of sugar weighs 60% more than a cup of flour (200 ÷ 125 = 1.6). This is also why "1 cup = 8 ounces" is only true for fluid ounces. A cup of flour fills 8 fluid ounces of space but weighs only about 4.4 ounces.

Technique changes the result too. Flour scooped directly from the bag packs down, so the cup holds more than flour spooned in and leveled off. Humidity, brand, and how firmly you pack brown sugar also move the number. If a recipe lists grams, weighing is the more reliable choice because a gram means the same thing everywhere.

For amounts outside these tables, the Volume Converter converts mL, liters, gallons, fluid ounces, cups, and tablespoons at once, and the Weight Converter handles grams, ounces, pounds, and kilograms. Neither tool turns a volume into a weight on its own, since that requires the ingredient's density. Because cup and tablespoon sizes differ by system, compare any converter's result for "1 cup" against the first table above before relying on it.

Worked example: converting an Australian recipe for US measuring tools

Suppose an Australian recipe calls for 2 cups of milk, 1 1/2 cups of flour, 3 tablespoons of melted butter, and 1 teaspoon of vanilla. Your kitchen has US cups and spoons.

  1. Milk: 2 × 250 = 500 mL. Two US cups hold 473 mL, leaving 500 − 473 = 27 mL. Since 27 ÷ 14.79 = 1.8, add just under 2 US tablespoons. If your liquid measure has mL markings, pour to 500 mL instead.
  2. Flour: 1.5 × 250 = 375 mL. By weight, using the table above, 1.5 × 132 = 198 g. If you have a scale, weigh 198 g. If not, 1 1/2 US cups is 355 mL, and the remaining 20 mL is about 1 1/3 US tablespoons, or 1 tablespoon plus 1 teaspoon (20 ÷ 14.79 = 1.35).
  3. Butter: 3 × 20 = 60 mL because these are Australian tablespoons. Since 60 ÷ 14.79 = 4.06, use 4 US tablespoons, or 1/4 cup. Reading these as US tablespoons would give only about 44 mL.
  4. Vanilla: 1 teaspoon is 5 mL in Australia and 4.93 mL in the US. The 0.07 mL gap is too small to measure, so use your regular teaspoon.

Quick reference for your next recipe

  • American recipe: 1 cup = 237 mL, 1 tablespoon = 15 mL, 1 teaspoon = 5 mL
  • Australian recipe: 1 cup = 250 mL, 1 tablespoon = 20 mL (4 teaspoons), 1 teaspoon = 5 mL
  • UK, Canadian, or New Zealand recipe using cups: usually 1 cup = 250 mL and 1 tablespoon = 15 mL, unless the author says otherwise
  • Old British cookbook: do not assume 250 mL; look for a measures page or compare with the 227 mL and 284 mL sizes
  • "Fluid ounces" with no country given: check where the recipe was published, since 20 fl oz can mean 568 mL or 591 mL
  • Pints in a UK recipe: measure 568 mL, not one US pint
  • Baking with grams listed: follow the grams and ignore the cups
  • Any cup-only recipe: use one set of cups for everything, then take extra care with fixed items such as eggs and butter sticks

Frequently Asked Questions

How many cups are in 500 mL or 1 liter?

500 mL is about 2.11 US customary cups (500 ÷ 236.59) or exactly 2 metric cups. One liter is about 4.23 US cups (1,000 ÷ 236.59) or exactly 4 metric cups.

Can I use a coffee mug as a measuring cup?

Only as a rough guide, because mugs have no standard size and many hold well over one cup. If a recipe uses cups only as proportions, the same mug can work for every ingredient, although fixed items such as eggs may no longer match. Before relying on a mug, fill it with water and pour that into a marked measure. The cup markings on coffee makers can also differ from a standard measuring cup, so check the manufacturer's information.

Do dry and liquid measuring cups hold different amounts?

A US dry cup and a US liquid cup are both meant to hold the same volume. The difference is in how you use them: a dry cup is filled to the rim and leveled, while a liquid cup has headroom and a spout so you can read the line without spilling. Using each for its intended purpose generally gives a more consistent measurement.

How big is a cup in Japanese recipes?

A standard Japanese cooking cup is 200 mL, noticeably smaller than US or metric cups. Rice is a separate case because it is often measured with a traditional 180 mL unit called a gō, and the cup supplied with a rice cooker commonly follows that size. Check which one the recipe means when rice is involved.

How much is a stick of butter in mL and grams?

A standard US stick of butter is 1/2 US cup, or 8 tablespoons, which is about 118 mL. It weighs 4 ounces, or about 113 grams. Stick sizes are mainly an American convention, so recipes from other countries usually give butter in grams instead.